BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//WP EVENT Manager Ical//NONSGML Events//EN
CALSCALE:GREGORIAN
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
BEGIN:STANDARD
DTSTART:19700101T000000
TZOFFSETFROM:+0530
TZOFFSETTO:+0530
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:6a236bc1a1c4a@www.maritimeinstitute.sg
DTSTAMP:20260606T003721Z
DTSTART;TZID=Asia/Kolkata:20140925T090000
DTEND;TZID=Asia/Kolkata:20140926T160000
LOCATION:Ngee Ann Polytechnic
SUMMARY:Primer Course 6: Commissioning, Installation and Start-up of Offshore Production Facilities
DESCRIPTION:COURSE OVERVIEWSuccess in handing over a completely commissioned facility (such as a Drilling Rig or FPSO) to the operator, whether a new build or modification, is contingent upon the completion of numerous phases of the project, from the front end design and engineering through fabrication and final commissioning.Before final hook-up and installation of an FPSO can be accomplished, three interrelated phases are undertaken:Mechanical CompletionPre-CommissioningCommissioningPlanning for them is critical to the schedule adherence, cost containment, successful installation and ultimate handoff for operation of the facility.Production Hosts (and Drilling Rigs) are only part of a Field Facility. Subsea Production equipment must be properly designed or specified and Installed in the Field. Eventually all this equipment must be Started-Up in a correct sequence.Case Studies and videos will be used to illustrate lessons learned from past successful projects. A CDROM of the powerpoint presentation pdfs in colour will be distributed with the lecture materials. WHO SHOULD ATTENDShipyards, Oil Rig-building yards, FPSO Construction Yards, subcontractors and equipment suppliers, offshore production and installation companies, offshore construction companies and service providers, and marine & offshore related SMEs personnel involved in design & engineering, planning, procurement, project management, engineering production, vessel construction, commercial, commissioning and administration. COURSE CONTENTIntroduction to Offshore Oil & Gas ProductionPlanning for Commissioning and Installation ActivitiesConstruction and Commissioning FPSOs or Jacket PlatformsConstruction and Commissioning Drilling RigsSelection of Subsea Field EquipmentInstallation of Field Production EquipmentExamples of Commissioning and Installation Activities.Field And FPSO Start-UpRole of the Offshore Installation Manager and other Key Posts.For more information, please contact Ms Vimala Govindasamy at +65 6460 8262 or vig@np.edu.sg.
END:VEVENT
END:VCALENDAR