BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//WP EVENT Manager Ical//NONSGML Events//EN
CALSCALE:GREGORIAN
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
BEGIN:STANDARD
DTSTART:19700101T000000
TZOFFSETFROM:+0530
TZOFFSETTO:+0530
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:6a235cdc72d4e@www.maritimeinstitute.sg
DTSTAMP:20260605T233348Z
DTSTART;TZID=Asia/Kolkata:20160310T090000
DTEND;TZID=Asia/Kolkata:20160311T160000
LOCATION:Ngee Ann Polytechnic
SUMMARY:COI-MOT Primer Course: FPSO Commissioning, Field Installation and FPSO Hook-Up/Start-Up of Offshore Production Facilities
DESCRIPTION:COURSE OVERVIEWThis course is the joint-cooperative effort of Ngee Ann Polytechnic Centre of Innovation – Marine & Offshore Technology and AZUR Offshore, UK.Success in handing over a completely commissioned facility (such as FPSO) to the operator, whether a new build or modification, is contingent upon the completion of numerous phases of the project, from the front end design and engineering through fabrication and final commissioning. Before final hook-up and installation of an FPSO can be accomplished, three interrelated phases are undertaken :• Mechanical Completion• Pre-Commissioning• and CommissioningPlanning for them is critical to the schedule adherence, cost containment, successful installation and ultimate handoff for operation of the facility.Production Hosts are only part of a Field Facility. Subsea Production equipment must be properly designed or specified and Installed in the Field.Eventually all this equipment must be Started-Up in a correct sequence.Case Studies and videos will be used to illustrate lessons learned from past successful projects. A DVD of the course videos and presentation Figures in colour will be distributed with the lecture notes.WHO SHOULD ATTENDShipyards, Oil Rig-building yards, FPSO Construction Yards, subcontractors and equipment suppliers, offshore production and installation companies, offshore construction companies and service providers, and marine & offshore related SMEs personnel involved in design & engineering, planning, procurement, project management, engineering production, vessel construction, commercial, commissioning and administration.COURSE CONTENT• Introduction to Offshore Oil & Gas Production• Planning for Commissioning and Installation Activities• Construction and Commissioning FPSOs• Selection of Subsea Field Equipment• Installation of Field Production Equipment• Examples of Commissioning and Installation Activities• Field And FPSO Hook-Up and Start-Up• Role of the Offshore Installation Manager and other Key PostsAWARDCertificate of Participation will be awarded to participants who have achieved at least 80% attendance.COURSE DETAILSStart Date : 10th to 11th March 2016Duration of Course : 14 hoursDay/Time : 9.00 am to 4:00 pmFee : $319 + 7% GST (Singaporean and permanent resident); $420 + 7% GST (Others)For course details and registration, please contact Mr Puah Kok Yong at pky@np.edu.sg.
END:VEVENT
END:VCALENDAR